![Icom IC-2820H Instruction Manual Download Page 68](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069068.webp)
47
5
DV MODE OPERATION (Optional UT-123 is required)
■
Received call sign
When a call is received in DV mode, the calling station and
the repeater call signs being used can be stored into the re-
ceived call record. The stored call signs are viewable in the
following manner.
Up to 20 calls can be recorded.
D
D
Desired call record indication
q
Display the RX call sign record screen;
Accessing from MENU screen:
z
Push [
F
•
] to display the function guide.
x
Push [MENU](V/MHz•SCAN)
(Right band’s)
to display the
“MENU” screen.
c
Rotate [DIAL] to select “RX CALL SIGN,” then push
[MAIN•BAND].
Accessing from function guide 2:
z
Push [
F
•
] twice to display the function guide 2.
x
Push [CD](M/CALL•MW)
(Left band’s)
to display the “RX
CALL SIGN” screen.
w
Rotate [DIAL] to select the desired record.
e
Push [MAIN•BAND] to display the received call details.
• CALLER
: The station call sign that made a call.
• CALLED
: The station call sign called by the caller.
• RXRPT1
: The repeater call sign used by the caller station.
• RXRPT2
: The repeater call sign linked from RXRPT1.
*The above screen is displayed when accessing the RX CALL
SIGN screen from function guide 2. A different screen is displayed
when accessing the screen from MENU screen.
r
Push [MAIN•BAND] or [BACK](V/MHz•SCAN)
(Right
band’s)
to return to the “RX CALL SIGN” screen.
t
Push [BACK](V/MHz•SCAN)
(Right band’s)
to exit from the
“RX CALL SIGN” screen.
✔
For your information
When receiving a call, the received station call sign is auto-
matically displayed at the bottom line of the function display.
This can be turned ON in display set mode.
(p.108)
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...