manualshive.com logo in svg

Icom IC-2820H, Instruction Manual

Share
Download
Icom IC-2820H Instruction Manual Download Page 116

95

12

PAGER/CODE SQUELCH

• PERSONAL CALLS
This display appears when you are called with your ID code
and the calling station’s ID code is 444.

• GROUP CALLS
This display appears when you are called with the group code
(444), provided 444 has been programmed into code chan-
nel C3.

• ERROR INFORMATION
When the transceiver receives an incomplete code, “E” and
previously received code appear.

■

Code squelch

When using code squelch you will only receive calls from sta-
tions which know your ID or group code. A 3-digit code is sent
each time [PTT] is pushed in order to open the receiving sta-
tion’s code squelch prior to voice transmission.

q

Set the operating frequency.

• Set the volume and squelch to the desired level as in normal op-

eration.

w

Push [

F

•

] to display the function guide.

e

Push [MENU](V/MHz•SCAN)

(Right band’s)

to enter the

MENU screen.

r

Rotate  [DIAL] to select “DUP/TONE…” then push
[MAIN•BAND] to enter DUP/TONE set mode.

t

Rotate  [DIAL] to select the “PGR/C-SQL” then push
[MAIN•BAND].

y

Rotate [DIAL] to set “C-SQL” then push [MAIN•BAND].

u

Rotate  [DIAL] to select “PGR MEMORY” then push
[MAIN•BAND].

i

Rotate [DIAL] to select the desired transmit code channel:

➥

Rotate [DIAL] to select the desired code channel.

➥

Push [BACK](V/MHz•SCAN)

(Right band’s)

three times

to return to frequency indication.

• “C-SQL.” appears.

o

Operate the transceiver in the normal way 

(push [PTT] to

transmit; release [PTT] to receive)

.

!0

To cancel the code squelch, enter “PGR/C-SQL” set item,
then rotate [DIAL] to select “OFF”

• “C-SQL” disappears.

Previously received code.

“E” (error) appears

Code channel

“PGR” blinks.

Summary of Contents for IC-2820H





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands