Icom IC-2820H, Instruction Manual

Page: 92 / 164

71
6
MEMORY MODE OPERATION
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or
erased from the band
(left or right)
.
➥
Push the desired band’s [M/CALL•MW] several times
to select memory mode.
➥
Push and hold the same band’s [MAIN•BAND] for
1 sec. then rotate the same band’s [DIAL] to select the
desired memory bank.
➥
Push the [MAIN•BAND] to select the bank then rotate
the [DIAL] to select the desired bank channel.
• Bank initial and bank channel stops blinking.
w
Push and hold the same band’s [M/CALL•MW] for 1 sec.
• “
X
” indicator and the memory channel number blink
e
Push [SEL](V/MHz•SCAN)
(Left band’s)
several times to se-
lect BANK, then push [EDIT](M/CALL•MW)
(Right band’s)
.
r
Rotate [DIAL] to select the desired bank initial
(A to Z)
to
transfer.
• Select no indication, “– – – –,” when erasing the contents from
the bank.
t
Push [>](M/CALL•MW)
(Left band’s)
then rotate the same
band’s [DIAL] to select a bank channel, if desired.
y
Push [BACK](V/MHz•SCAN)
(Right band’s)
to return to the
select memory write mode.
u
Push and hold [S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to be transferred or erased.
i
Repeat steps
q
to
t
for transferring or erasing an another
bank’s contents.
■
Erasing/transferring bank contents