![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069010.webp)
III
QUICK REFERENCE GUIDE
D
Using the mounting bracket
q
Drill 4 holes where the mounting bracket is to be installed.
• Approx. 5.5–6 mm (
1
⁄
4
″
) when using nuts; approx. 2–3 mm (
1
⁄
8
″
)
when using self-tapping screws.
w
Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
e
Adjust the angle for your suitable position.
D
Controller/Separation cable connection
Two connection cables, controller cable
(10 cm; 3.9 in)
for sin-
gle body installation and separation cable
(3.4 m; 11.2 ft)
for re-
mote installation, are supplied with the IC-2820H.
Connect the controller and the main unit using with the sup-
plied connection cable as follows.
IMPORTANT!— number of pin
The connectors on the ends of the connection cable have dif-
ferent numbers of pins - one end has 6 pins and the other end
4 pins. You should connect the 6-pin connector to the main
unit, and the 4-pin connector to the controller.
Controller
Main unit
4-pin connector
6-pin connector
Nut
Spring washer
When using
self-tapping
screws
Flat washer
Mounting nut
Mounting
bracket
25˚
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...