Icom IC-2820H, Instruction Manual

Page: 126 / 164

105
14
MENU SCREEN OPERATION
■
SCAN items
D D
Scan timer
Selects scan resume timer from T-15
(default)
, T-10, T-5 and
P-2.
• T-15/10/5 : Scan pauses for 15/10/5 sec., then resumes.
• P-2
: Pause on a signal until signal disappears,
then resumes 2 sec. after the signal disap-
pears.
D D
Program skip scan
Sets programmed skip scan setting from ON
(default)
and
OFF for full scan or programmed scan operation.
D D
Bank link scan
Sets the memory bank link function ON and OFF
(default)
. The
link function provides continuous bank scan, scanning all con-
tents in the selected banks during bank scan.
• Bank link setting
q
Enter MENU screen via function guide.
➥
Push [
F
• ] to display function guide.
➥
Push [MENU](V/MHz•SCAN)
(Right band’s)
to enter
MENU screen.
w
Rotate [DIAL] to select “SCAN,” then push [MAIN•BAND].
e
Rotate [DIAL] to select “BANK LINK,” then push
[MAIN•BAND] to enter bank setting.
r
Rotate [DIAL] to select the desired bank initial, then push
[MAIN•BAND].
t
Rotate [DIAL] to turn ON
(default)
and OFF the link setting,
then push [MAIN•BAND].
y
Rotate [DIAL] to select next bank and repeat steps
r
to
t
, or push [BACK](V/MHz•SCAN)
(Right band’s)
three
times to exit scan set mode.