![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069069.webp)
48
5
DV MODE OPERATION (Optional UT-123 is required)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
D
One-touch reply
q
After receiving a call, push [
F
•
] twice to display the
function guide 2.
w
Push [R>CS](TONE•DTMF) to set the received call sign as
for the call.
D
D
One-touch reply using the call record
The stored call signs in the call record can be used to the call.
q
Perform the steps
q
and
w
of “
D
Desired call record indi-
cation” described on the previous page.
➥
When selecting a call record via MENU screen:
w
Push [MAIN•BAND] to display the call record details.
e
Push [R>CS](V/MHz•SCAN)
(Left band’s)
to set the re-
ceived call sign to that of the call record.
➥
Setting from function guide 2:
w
Push [R>CS](TONE•DTMF) to set the received call sign to
that of the call record.
After the above operations, push [PTT] to transmit; release
to receive.
NOTE:
• Set your own call sign (MY) in advance.
(p. 39)
• The call sign stored in “CALLER” is stored as “YOUR,”
“RXRPT1” is stored as “RPT2” and “RXRPT2” is stored
as “RPT1.”
• Error beeps sound when a call sign is received incor-
rectly, and no call sign is set in this case.
✔
For your information
When a call specifying your call sign is received, the call signs
of the calling station and the repeater it is using can be used
for operation automatically.
• When “RX call sign auto write”
(p. 103)
is set to “AUTO,” the
station call sign in “CALLER” is set to “YOUR” automatically.
• When “Repeater call sign auto write”
(p. 104)
is set to
“AUTO,” the stored station call sign in “RXRPT1” is stored
as “RPT2” and “RXRPT2” is stored as “RPT1” automatically.
Important!
Setting call signs with the “One-touch reply using the call
record” operation as at left are for temporary operation only.
Therefore, the set call signs will be overwritten when an-
other call record is used to set call signs.
• Never save into a call sign memory.
If you want to save the set call signs, see “Copying the call
record contents into call sign memory”
(p. 50)
for details.
[R>CS]
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...