![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069134.webp)
113
14
MENU SCREEN OPERATION
■
GPS-A SET MODE items
D
D
Unproto address
Sets up to 56-character unproto address.
q
Push [MAIN•BAND] to enter programming condition.
w
Rotate [DIAL] to select the desired character.
• Push [Aa](TONE•DTMF) to select the character group from cap-
ital letters or lower case letters.
• Push [1/](M/CALL•MW) (Right band’s) to select the character
group from numbers or symbols.
• Push [>](M/CALL•MW) (Left band’s) or [<](V/MHz•SCAN) (Left
band’s) to move the cursor right or left, respectively.
• Push [CLR](DUP/MONI) to clear the selected character.
• Push and hold [CLR](DUP/MONI) for 1 sec. to clear all charac-
ters after the selected character.
e
Repeat steps
w
until the desired address is programmed.
r
Push [MAIN•BAND] to set the programmed address.
t
Push [BACK](V/MHz•SCAN)
(Right band’s)
to return to the
GPS-A set mode screen.
D
D
Data extension
Sets the data extension capability from “COURSE/SPEED”
and OFF
(default)
.
The transceiver’s course and speed information is addition-
ally transmitted with position data when “COURSE/SPEED”
is selected.
NOTE: When “COURSE/SPEED” is selected, number of
character for “COMMENT” is limited to 36-character.
D
D
Time stamp
Selects transmitting time stamp type from DHM, HMS and
OFF. This function can be transmitted UTC
(Universal Time Co-
ordinated)
time only.
• OFF
: No time stamp is transmitted.
(default)
• DHM
: Time stamp in the format of Day, Hour and
Minute is transmitted.
• HMS
: Time stamp in the format of Hour, Minute and
Second is transmitted.
D
D
GPS-A symbol
Selects the desired GPS-A symbol.
Available symbols: Ambulance, Bus, Fire Truck, Bicycle,
Yacht, Helicopter, Small Aircraft, Ship
(Power Boat), Car
(default)
, Motorcycle,
Balloon, Jeep, Recreational Vehicle,
Truck, Van, Other
If “Other” is selected, set the desired symbol code as follows;
q
Push [MAIN•BAND] to enter programming condition.
w
Rotate [DIAL] to select the 1st character from “\” and “/.”
e
Push [>](M/CALL•MW)
(Left band’s)
to select the 2nd digit.
r
Rotate [DIAL] to select the 2nd digit character.
t
Push [MAIN•BAND] to program the symbol code.
When “Other” is selected, check the symbol codes of
APRS,
®
and set it correctly.
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...