Icom IC-2820H, Instruction Manual

Page: 102 / 164

81
9
PRIORITY WATCH
■
Priority watch operation
q
Select VFO mode, then set an operating frequency in the
desired MAIN band
(left or right)
.
w
Set the watched channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push and hold the main
band’s [V/MHz•SCAN] for 1 sec. to start memory scan.
For call channel watch:
Select the desired call channel by pushing the main band’s
[M/CALL•MW] once or twice, then rotate the [DIAL].
e
Push and hold [LOW•PRIO] for 1 sec. to start the watch.
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 78)
r
Push and hold [LOW•PRIO] for 1 sec. to stop the watch.
z
Select VFO mode; then, set the desired fre-
quency.
x
Set the watched channel(s).
For memory channel watch:
Push [MR/CALL] then [
Y
] or [
Z
] to select the de-
sired memory channel.
For memory scan watch:
Push [MR/CALL], then push [
SCAN
2] to start the
memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [
Y
] or [
Z
]
to select the call channel.
c
Push [
PRIO
3(PTT-M)] to start the watch.
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan re-
sume condition. (p. 78)
• To resume the watch manually when paused, push
[
PRIO
3(PTT-M)].
v
To stop the watch, push [
CLR
A(MW)].
PRIO
3