![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069030.webp)
9
1
PANEL DESCRIPTION
■
Main unit
q
CONTROLLER CONNECTOR [CONTROLLER] (p. III)
Connects the controller unit with the supplied controller or
separation cable.
w
DATA JACK [DATA]
(p. 57)
Connect to a PC via the optional data communication cable
OPC-1529R for data cloning with the optional cloning soft-
ware, CS-2820, or low-speed data communication in DV*
mode operation.
*Available only when the optional UT-123 is installed.
e
GPS ANTENNA CONNECTOR [GPS ANT] (p. IV)
When the optional digital unit, UT-123, is installed, con-
nects the GPS antenna supplied with the optional UT-123.
r
PACKET JACK [PACKET]
(pgs. 120, 121)
Connects a TNC
(Terminal Node Controller)
, etc. for data
communications. The receiver can support 1200/9600 bps
packet communication
(AFSK/GMSK)
.
t
MICROPHONE CONNECTOR [MIC]
(p. IV)
Connects the supplied or an optional microphone.
q
+8 V DC output (Max. 10 mA)
w
Channel up/down
e
8 V control IN
r
PTT
t
GND (microphone ground)
y
MIC (microphone input)
u
GND
i
Data IN
y
ANTENNA CONNECTOR [ANT1 TX/RX]
(p. IX)
Connects a 50
Ω
antenna with a PL-259 connector and a
50
Ω
coaxial cable for transmission and reception.
u
COOLING FAN
Rotates while transmitting.
Also rotates while receiving depending on the setting in set
mode.
(p. 101)
q
i
q
w
r
t
e
!1
u
i
o !0
y
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...