Icom IC-2820H, Instruction Manual

Page: 115 / 164

94
12
PAGER/CODE SQUELCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Pager operation
D
Calling a specific station
q
Program the pager code channel in advance
(p. 93)
.
w
Set the operating frequency.
• Set the volume and squelch to the desired level as in normal op-
eration.
e
Push [
F
• ] to display the function guide.
r
Push [MENU](V/MHz•SCAN)
(Right band’s)
to enter the
MENU screen.
t
Rotate [DIAL] to select “DUP/TONE…” then push
[MAIN•BAND] to enter DUP/TONE set mode.
y
Rotate [DIAL] to select the “PGR/C-SQL” then push
[MAIN•BAND].
u
Rotate [DIAL] to set “PGR” then push [MAIN•BAND].
i
Select the desired 3-digit transmit code channel:
➥
Rotate [DIAL] to select “PGR MEMORY” then push
[MAIN•BAND].
➥
Rotate [DIAL] to select the desired pager code chan-
nel.
➥
Push [BACK](V/MHz•SCAN)
(Right band’s)
three times
to return to frequency indication.
• “PGR” appears in normal frequency indication.
o
Push [PTT] to transmit the pager code.
!0
Wait for an answer back.
• When the transceiver receives an answer back code, the func-
tion display shows the other member’s ID or group code.
!1
After confirming a connection, perform the previous steps
e
to
u
and select the code squelch operation “C-SQL,”
or non-selective calling system, “OFF” in step
u
.
• Push [BACK](V/MHz•SCAN) (Right band‘s) twice to return to
frequency indication.
!2
Communicate with the other party as normal: push [PTT]
to transmit; release to receive.
D
Waiting for a call from a specific station
q
Set the operating frequency.
w
Turn pager function ON.
• Perform the steps
e
to
u
in “
D
Calling a specific station” as at
left.
• “PGR” indication appear.
e
Wait for a call.
• When receiving a call, the caller’s ID or group code appears as
shown at next page.
r
Push [PTT] to send an answer-back call and display the
operating frequency.
t
After confirming a connection, select the code squelch
operation “C-SQL,” or non-selective calling system “OFF.”
Select “PGR”