![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069110.webp)
89
11
TONE SQUELCH AND POCKET BEEP
■
DTCS polarity setting
q
Push [
F
•
] to display the function guide.
w
Push [MENU](V/MHz•SCAN)
(Right band’s)
to enter MENU
screen.
e
Rotate [DIAL] to select “DUP/TONE…” then push
[MAIN•BAND].
r
Rotate [DIAL] to select “DTCS POLARITY” then push
[MAIN•BAND].
t
Rotate [DIAL] to select the desired DTCS polarity then
push [MAIN•BAND].
• BOTH N : Normal phase is used for both TX and RX.
(Default)
• TN-RR
: Normal phase is used for TX; Reverse phase
for RX.
• TR-RN
: Reverse phase is used for TX; Normal phase
for RX.
• BOTH R : Reverse phase is used for both TX and RX.
y
Push [BACK](V/MHz•SCAN)
(Right band’s)
to exit from
DUP/TONE set mode.
z
Push [
SET
B(D-OFF)] to enter set mode.
x
Push [
Y
]/[
Z
] several times to select
“DUP/TONE…” then push [
SET
B(D-OFF)].
c
Push [
Y
]/[
Z
] several times to select “DTCS PO-
LARITY” then push [
SET
B(D-OFF)].
v
Push [
Y
]/[
Z
] to select the desired polarity then
push [
SET
B(D-OFF)].
b
Push [
CLR
A(MW)] to exit DUP/TONE set mode.
SET
B
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...