![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069086.webp)
65
6
MEMORY MODE OPERATION
■
Memory bank setting
q
Push the desired band’s [M/CALL•MW] several times to
select memory mode, then rotate the same band’s [DIAL]
to select the desired memory channel.
w
Push and hold the same band’s [M/CALL•MW] for 1 sec.
• “
X
” and memory number indication blinks.
e
Push [SEL](V/MHz•SCAN)
(Left band’s)
once to select
“BANK” setting stand-by condition.
• “
X
” indicator blinks.
r
Push [EDIT](M/CALL•MW)
(Right band’s)
to edit.
• “
X
” and 1st digit blink.
t
Rotate the same band’s [DIAL] to select the desired bank
group.
• A to Z bank groups available.
y
Push [>](M/CALL•MW)
(Left band’s)
then rotate [DIAL] to
select the desired bank channel.
• “
X
” and last 2 digits blink.
u
Push [BACK](V/MHz•SCAN)
(Right band’s)
to set the bank
initial and channel number.
• “
X
” indicator blinks.
i
Push and hold [S.MW](M/CALL•MW)
(Left band’s)
for 1 sec.
to overwrite the memory channel to store the memory bank
settings.
o
Repeat steps
q
to
i
to set another memory channel into
the same or another bank.
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...