![background image](http://html.mh-extra.com/html/icom/ic-2820h/ic-2820h_instruction-manual_612069084.webp)
63
6
MEMORY MODE OPERATION
D
Programming a memory channel via the microphone
The microphone can also be used to program mem-
ory channels.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency using the keypad.
➥
Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone encoder ON/OFF and its frequency)
, if neces-
sary.
x
Push [MR/CALL] to enter memory mode.
c
Push [
ENT
C(T-OFF)], then set the desired memory chan-
nel using the keypad.
v
Push [VFO/LOCK] to select VFO mode.
b
Push [FUNC] then push and hold [
CLR
A(MW)] for 1 sec. to
program.
➥
3 beeps may sound and the VFO contents
(including the
subaudible tone frequency, etc.)
are programmed.
➥
Memory channel number increases when continuing to
push [
CLR
A(MW)] after programming.
MW
[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.
Beep
“
Beep
“
Beep
Beep
Beep
“
“
“
“
“
Push ,
Push then for 1 sec. and continue to push
➠
MR/
CALL
Push then
Push
Push
Summary of Contents for IC-2820H
Page 160: ...139 MEMO ...
Page 161: ...140 MEMO ...
Page 162: ...141 MEMO ...
Page 163: ...142 MEMO ...