manualshive.com logo in svg

IBM System x iDataPlex dx360 M4 7912, Service Manual

The IBM System x iDataPlex dx360 M4 7912 is a high-performance server designed to meet the demands of modern data centers. For those looking to service or maintain this powerful machine, a free Service Manual is available for download from manualshive.com. Get the manual you need to keep your system running smoothly.

Share
Download
background image

User response:

Complete the following steps:

1.

Verify that matching DIMMs are installed in the

correct population sequence, according to the
service information for this product. Correct any
configuration issues found.

2.

(Trained Service technician only) Replace

associated Processor. Inspect Processor socket and
replace the system board first if socket is damaged

I.18009

[I.18009] A core speed mismatch has
been detected for one or more
processor packages.

Explanation:

Processors have mismatched Core

Speed

Severity:

Error

User response:

Complete the following steps:

1.

Verify that matching processors are installed in the

correct processor sockets according to the service
information for this product. Correct any mismatch
issues found.

2.

Check IBM support site for an applicable service

bulletin or firmware update that applies to this
Processor error.

3.

(Trained Service technician only) Replace

Processor. Inspect Processor socket and replace
the system board first if socket is damaged.

I.1800A

[I.1800A] A mismatch has been
detected between the speed at which a
QPI link has trained between two or
more processor packages.

Explanation:

Processors have mismatched Bus

Speed

Severity:

Error

User response:

Complete the following steps:

1.

Verify that the Processor is a valid option that is

listed as a Server Proven device for this system. If
not, remove the Processor and install a Server
Proven one.

2.

Verify that matching Processors are installed in the

correct Processor sockets according to the service
information for this product. Correct any mismatch
found.

3.

Check IBM support site for an applicable service

bulletin or firmware update that applies to this
processor error.

4.

(Trained Service technician only) Replace the

Processor. Inspect Processor socket and replace
the system board first if socket is damaged

I.1800B

[I.1800B] A cache size mismatch has
been detected for one or more
processor packages.

Explanation:

Processors have one or more cache

levels with mismatched size

Severity:

Error

User response:

Complete the following steps:

1.

Verify that matching processors are installed in the

correct processor sockets according to the service
information for this product. Correct any mismatch
found.

2.

Check IBM support site for an applicable service

bulletin or firmware update that applies to this
Processor error.

3.

(Trained Service technician only) Replace the

system board.

I.1800C

[I.1800C] A cache type mismatch has
been detected for one or more
processor packages.

Explanation:

Processors have one or more cache

levels with mismatched type

Severity:

Error

User response:

Complete the following steps:

1.

Verify that matching Processors are installed in the

correct Processor sockets according to the service
information for this product.

2.

Check IBM support site for an applicable service

bulletin or firmware update that applies to this
Processor error.

3.

(Trained Service technician only) Replace the

system board.

I.1800D

[I.1800D] A cache associativity
mismatch has been detected for one or
more processor packages.

Explanation:

Processors have one or more cache

levels with mismatched associativity

Severity:

Error

User response:

Complete the following steps:

1.

Verify that matching Processors are installed in the

correct Processor sockets according to the service
information for this product.

2.

Check IBM support site for an applicable service

bulletin or firmware update that applies to this
Processor error.

3.

(Trained Service technician only) Replace the

system board.

I.18009 • I.1800D

20

System x iDataPlex dx360 M4 Types 7912 and 7913: Problem Determination and Service Guide

Summary of Contents for System x iDataPlex dx360 M4 7912

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x iDataPlex dx360 M4 7912

Cabletron Systems SmartSwitch 9000 Installation Manual preview
SmartSwitch 9000
Brand: Cabletron Systems Pages: 18
Advantech HPC-8208 User Manual preview
HPC-8208
Brand: Advantech Pages: 48
ICP Electronics RACK-360 User Manual preview
RACK-360
Brand: ICP Electronics Pages: 9
ICP Electronics EC-1040 User Manual preview
EC-1040
Brand: ICP Electronics Pages: 26
National Instruments SLSC-12001 Getting Started Manual And Specifications preview
SLSC-12001
Brand: National Instruments Pages: 30
Supermicro SC506 Series User Manual preview
SC506 Series
Brand: Supermicro Pages: 29
Supermicro CSE-LB16-W User Manual preview
CSE-LB16-W
Brand: Supermicro Pages: 31
Supermicro SC101F User Manual preview
SC101F
Brand: Supermicro Pages: 37
Supermicro SC101S User Manual preview
SC101S
Brand: Supermicro Pages: 40
Supermicro CSE-LA15-W User Manual preview
CSE-LA15-W
Brand: Supermicro Pages: 31
Supermicro SC721TQ-250B User Manual preview
SC721TQ-250B
Brand: Supermicro Pages: 68
Supermicro SC745BAC-R1K23B User Manual preview
SC745BAC-R1K23B
Brand: Supermicro Pages: 72
Supermicro SCF418 Series User Manual preview
SCF418 Series
Brand: Supermicro Pages: 87
Supermicro CSE-LB16-AW User Manual preview
CSE-LB16-AW
Brand: Supermicro Pages: 53
Supermicro CSE-LB13-AW Series User Manual preview
CSE-LB13-AW Series
Brand: Supermicro Pages: 53
Supermicro CSE-LA15-AW Series User Manual preview
CSE-LA15-AW Series
Brand: Supermicro Pages: 51
Supermicro CSE-815BTQC-R860W User Manual preview
CSE-815BTQC-R860W
Brand: Supermicro Pages: 55
Supermicro CSE-116BAC10-R860W User Manual preview
CSE-116BAC10-R860W
Brand: Supermicro Pages: 54

Brands by name

Popular brands

Load more brands