Installing the Expansion Unit in a Rack
9. Remove the decorative bezel.
a. Remove and discard the two white screws and nuts
.2/
from the decorative bezel
.1/
on the front of the expansion
unit.
b. Carefully attach the bezel to the front of the expansion unit.
The decorative bezel is mounted correctly when the
alignment pins match with the holes in the expansion unit.
Front of Rack
c. Insert the remaining two (black) hex head screws
.2/
, one
on each side, and hand tighten.
Note: To avoid cracking the bezel, be careful not to
cross-thread the screws or over tighten them.
30
IBM Netfinity EXP15 Installation and User's Handbook
Summary of Contents for EXP15
