Installing the Expansion Unit in a Rack
2. Align the rail assembly (provided with your hardware kit) to
the rear of the rack.
a. Install two of the eight (black) hex head screws
.1/
(provided with your hardware kit) in the top and bottom
positions, starting with the top.
b. Loosely tighten the screws.
Rear of Rack
3. Loosen the five screws (four large screws and one small screw)
.2/
located on the interior of the rail assembly; then slide the
front rail assembly forward
.3/
until it makes contact with the
front rack rail.
Note: Make sure the front rail position matches the rear rail
position.
4. From the front of the rack, thread one (black) hex head screw
.4/
into the bottom position of the rail assembly and tighten
firmly.
Chapter 3. Rack Installation
27
Summary of Contents for EXP15
