IBM Cloud Object Storage System Slicestor 2212 Series, Service And Maintenance Manual

Page: 102 / 197

DIAGNOSTICS Diagnostics are running on the device. When
diagnostics have completed for the device, the
state (of configured devices) will automatically
return to DISABLED. For devices that are not
configured, the state will return to NOT
CONFIGURED when testing is complete.
| 4. If you select the Token-Ring interface (
<
1. Token Ring
>
on the Device List
| panel), the Device Status and Control panel for the Token-Ring adapter
| appears (Figure 6-3 and Figure 6-4).
|
‡
|
—
|
Device Status and Control
|
Token Ring, Slot 1,- Net # 0
|
Operational Status Diagnostic Status Fault Status Network Connection
|
ENABLED ACTIVE OK UP
|
Select from the following:
|
Disable Device
|
<1. Enable Device>
|
<2. Run Default Test >
|
<3. Run Interactive test >
|
<4. Loop Test - stop on first error >
|
<5. Loop Test - Log all errors >
|
Stop Test
|
<6. View Hardware Test Log >
|
<7. View Hardware Error Log >
|
----------------------------------------------------------------
|
Select (1-7 or B=Back R=Refresh H=Help):
|
ˆ
|
˜
|
Figure 6-3. Device Status and Control Panel (Device Disabled), Version 1.0
|
‡
|
—
|
Device Status and Control
|
Token Ring, Slot 1,- Net # 0
|
Operational Status Diagnostic Status Fault Status Network Connection
|
ENABLED ACTIVE OK UP
|
Select from the following:
|
Disable Device
|
<1. Enable Device >
|
<2. Run test one time >
|
<3. Loop test until error occurs >
|
<4. Loop test until manualy stopped - log all errors >
|
Stop looping test
|
<5. View Hardware Test Log >
|
<6. View Hardware Error Log >
|
----------------------------------------------------------------
|
Select (1-6 or B=Back R=Refresh status H=Help):
|
ˆ
|
˜
|
Figure 6-4. Device Status and Control Panel (Device Disabled), Version 2.0
6-4
2212 Service and Maintenance