IBM Cloud Object Storage System Slicestor 2212 Series, Service And Maintenance Manual

Page: 158 / 197

3. From the
Boot Config>
prompt, type reload and press Enter. From the
SVC>
prompt, type
reboot and press Enter.
Transferring Files Using TFTP
Question How do I TFTP operational code and configuration files onto the IBM 2212?
Answer Use TFTP to transfer software code loads and configuration files from a workstation or server
to the IBM 2212. You will need to substitute your own values for the IP address and path,
which are given as examples. The number of bytes received is also an example. You can use
TFTP from the
SVC>
prompt or the OPCON (*) prompt as described in the following sections.
Note: You transfer the files to banks within the IBM 2212. The banks represent the directories
that have been created automatically; you do not have to be concerned about
transferring the files to a particular directory within the IBM 2212.
TFTP File Transfer using the Operating Software
1. From the OPCON prompt (*), type talk 6 and press Enter to reach the
Config
>
prompt. If the
Config
>
prompt does not appear, press Enter again.
2. Type boot and press Enter. The
Boot config>
prompt is displayed.
3. To get the software code load, type tftp get load mod and press Enter. To get a configuration file,
type tftp get config and press Enter.
You cannot overwrite a currently active bank image or configuration file.
4. When prompted, specify the IP address of the TFTP server.
5. When prompted, specify the path/file name for the code load or config file.
6. When prompted, specify the bank in which you want the code load or config file written. If you are
transferring a config file, you are prompted for the config file (1 through 4) in which you want to
transfer the configuration data.
The following example shows a software code load:
* talk 6
Config> boot
Boot config>tftp get load mod
Boot config>tftp get load mod
+------ BankA -----------+--------- Description ----------+------ Date -------+
IMAGE - AVAIL 10 Aug 1998 16:03
CONFIG 1 - AVAIL * cc_158e 10 Aug 1998 16:06
CONFIG 2 - NONE 10 Aug 1998 16:49
CONFIG 3 - NONE
CONFIG 4 - NONE
+------ BankB -----------+--------- Description ----------+------ Date -------+
IMAGE - ACTIVE 10 Aug 1998 13:23
CONFIG 1 - AVAIL cc_158e 10 Aug 1998 13:23
CONFIG 2 - ACTIVE * cc_158e 11 Aug 1998 10:21
CONFIG 3 - NONE |
CONFIG 4 - NONE |
+------------------------+--------------------------------+------------------
* - Last Used Config L - Config File is Locked
Auto-boot mode is enabled.
Specify the server IP address (dotted decimal): [1.2.3.4] 10.10.10.99
Specify the remote modules directory: :(/u/bin/) /tftpboot/2212a
E-20
2212 Service and Maintenance