IBM Cloud Object Storage System Slicestor 2212 Series, Service And Maintenance Manual

Page: 151 / 197

Enter Local Netmask: [255.255.255.0]? 255.255.248.0
Enter Remote IP Address: [15.110.33.99]?
Remote Path and File name:
/oracle/appndmp
Enter Path and File name (32 chars max):
Enter File Compression Mode (C-Comp or U-Uncomp): [C]? U
Do you want to save your changes ? (Yes, No): [No] Yes
New System Dump Target Settings:
Dump Target: Remote Host on Network
Local Interface Settings:
Device Type: Ethernet
Slot Number: 1
Port Number: 1
IP address: 15.110.33.99
Net Mask: 255.255.248.0
Remote Host Settings:
IP address: 15.110.33.99
Remote Filename: /oracle/appndmp
Remote file will be uncompressed and "0.unc", "1.unc", or "2.unc" will be
appended to the end of the filename.
Enable Dumping from SVC> Prompt
You can also enable dumping from the
SVC
>
prompt. Access the Service Recovery Interface as described
in “Accessing the Service Recovery Prompt (SVC>)” on page E-4. Then, type dump and press Enter.
You will be prompted for the rest of the information, as shown in the following example.
svc> dump
This command enables or disables system dump and
selects the dump target as disk or remote host.
Dump is currently enabled.
Do you want to disable dump ?
n
Dump is currently enabled.
Dump Target:
Remote Host on Network.
Enter Dump Target (Disk or Network or to keep current value):
Remote Host settings:
IP address:
9.9.9.1
Remote Filename: /tmp/dump_to_host
Remote file will be compressed and "0.cmp", "1.cmp", or "2.cmp" will be
appended to the end of the filename.
Do you want to set or change the remote dump parameters ?
y
Press
to save current setting.
Enter IP address (0.0.0.0 form):
15.110.33.99
Enter remote path and filename (32 chars max):
/oracle/appndmp
Enter Remote File Compression Mode (Compressed or Uncompressed):
Compressed
Remote Host settings:
Appendix E. Common Tasks
E-13