IBM Cloud Object Storage System Slicestor 2212 Series, Service And Maintenance Manual

Page: 12 / 197

Table 1-1. System card LEDs (Standard and High-Performance)
LED Color Meaning
System card status Green On - Operating normally.
Off - Waiting for power on or the operational
code to be loaded.
Yellow On - Card has a fault.
Service port
(standard system
card only) Green On - Operating normally.
Off - DRAM may be defective.
Yellow On and system card status yellow LED On -
Service port defective.
Off - No problem detected
Hard Drive 1 and 2
(high-performance
system card only) Yellow HD1 On - The compact flash has a fault.
HD1 Off - No problem detected.
HD2 On - The hard drive has a fault.
HD2 Off - No problem detected.
WAN ports Green On - Port is operational.
Off- Port is not configured or is disabled.
Yellow On - Port has a hardware fault.
Blinking - The port has an I/O failure.
Off - No problem detected.
PMC adapters Green On - Adapter is operational.
Off - Adapter is up. No problem detected.
Yellow On - Adapter has a hardware fault.
Blinking - The adapter has an I/O failure.
Off - Adapter is up. No problem detected.
Adapter Port LEDs
Each adapter port has LEDs to indicate the port’s condition as described in the
following sections.
Note: There are also LEDs on the rear of the IBM 2212 that indicate the status of
the adapter in the corresponding slot. See “Additional Slot-Status LEDs” on
page 1-8.
1-4
2212 Service and Maintenance