IBM 9114-275 - IntelliStation POWER 275, Service Manual

Page: 66 / 377

The System Management Services menu is displayed. If you are loading diagnostics from the CD-ROM, you
may not have pressed the correct key when you were
trying to indicate a service mode IPL of the diagnostic
programs. If this is the case, start again at the
beginning of this step.
If you are sure you pressed the correct key, the
device or media you are attempting to boot from may
be faulty.
1. If you are using a keyboard and a graphic display
attached to the system:
v
Select View Error Log
v
If an error is logged, check the time stamp.
v
If the error was logged during the current boot
attempt, record it.
v Look up the error in Chapter 5, “Error Code to
FRU Index,” on page 131
v
If no recent error is logged in the error log, go
to step 3.
2. If you are using an ASCII terminal:
v
Select View Error Log
v
If an error is logged, check the time stamp.
v
If the error was logged during the current boot
attempt, record it.
v Look up the error in Chapter 5, “Error Code to
FRU Index,” on page 131 and do the listed
action.
v If no recent error is logged in the error log, go
to step 3.
3. Try to boot from an alternate boot device
connected to the same controller as the original
boot device. If the boot succeeds, replace the
original boot device (for removable media devices,
try the media first).
4. Go to “MAP 1548: System Processor Problem
Isolation” on page 90.
You suspect a cable problem. Go to RS/6000
Eserver
pSeries Adapters, Devices,
and Cable Information for Multiple Bus Systems .
All other problems. Go to “MAP 1020: Problem Determination” on page
49..
48
IntelliStation POWER 9114 Model 275 Service Guide