IBM 9114-275 - IntelliStation POWER 275, Service Manual

Page: 33 / 377

Operator Panel Component Locations
The following illustration shows the component location on the operator panel.
Number Component Name Component Description
1 Operator Panel Display Displays current status of system startup, or diagnostic
information in the event of a hardware problem.
2 Attention LED Normal State - LED is off
3 System Reset Button Resets the system
4 Power LED Blinking - When connected to the power source (System is in
standby mode).
Solid - When power-on button has been pressed.
Note: There is approximately a 30-second transition period
from the time the power-on button is pressed to when the
power LED goes from blinking to on solid. During the transition
period, you may observe the blinking intervals speed up.
5 Power-On Button Turns the system power on and off.
6 Power-On Button Guard Prevents accidental power-on and power-off operations.
7 Service Processor Reset Switch
(Pinhole)
Service Personnel Use
8 Serial Number Label Displays the system serial number
Chapter 1. Reference Information
15