IBM 9114-275 - IntelliStation POWER 275, Service Manual

Page: 127 / 377

Table 1. Service Processor Checkpoints (continued)
Checkpoint Description Action/
Possible Failing FRU
9109 ABIST See note 1 on page 112.
910A Non-processor scan interface BATs and
LBIST
See note 1 on page 112.
910B Wire test See note 1 on page 112.
910C Initialize main storage (system memory) See note 1 on page 112.
910D Configure processors See note 1 on page 112.
910E Configure and initialize I/O See note 1 on page 112.
910F Test and initialize main storage (system
memory)
See note 1 on page 112.
9110 Free IPL LIDs See note 1 on page 112.
9111 Load run-time LIDS See note 1 on page 112.
9112 Load dump LIDs See note 1 on page 112.
9113 Enable attention See note 1 on page 112.
9114 Enable function 22 See note 1 on page 112.
9115 Load system IPL program See note 1 on page 112.
9116 Load system data areas (NACA/PACA) See note 1 on page 112.
9117 Start system IPL program See note 1 on page 112.
9119 Waiting for VPD collection to complete See note 1 on page 112.
9184 Firmware image being loaded into service
processor’s control storage during firmware
update.
1. Remove, then reapply power to the
system. If the service processor enters
recovery mode, (indicated by A1FD
0000 in the display), attempt to update
the firmware again in recovery mode. If
the service processor comes up to the
OK prompt, try again to update the
firmware using the service processor
menus.
2. Call service support.
91C4 Flash update pending, either a firmware
update or hypervisor dump.
Note: This checkpoint may be displayed
during the firmware update process. The
checkpoint may be displayed for a long
period of time during the process. If
process does not complete, the system
may be hung.
See note 1 on page 112.
91FF Control being handed to system processor
from service processor
See note 1 on page 112.
9200 Scan interface BATs See note 1 on page 112.
9300 Logic BIST See note 1 on page 112.
9301 Scanned ABIST See note 1 on page 112.
9302 Dedicated ABIST See note 1 on page 112.
9303 Dedicated ABIST array fuse repair
calculation
See note 1 on page 112.
9380 Built-in-self-test (BIST) See note 2 on page 112.
Chapter 4. Checkpoints
109