IBM 9114-275 - IntelliStation POWER 275, Service Manual

Page: 192 / 377

Table 9. Common Firmware Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
B1xx 4602 Hardware failure
1. Was this error code logged just after the
system crashed?
NO Go to step 3.
Yes Go to step 2.
2. Examine the service processor error log.
Look for a 4xxx yyyy error that calls out
FRU(s) in the system unit whose timestamp
just precedes the B1xx 4602 error. If a 4xxx
yyyy error occurred, replace the FRU
indicated by the location code. If there is no
4xxx yyyy error whose timestamp just
precedes the B1xx 4602 error, continue to
step 3.
3.
a. Reboot the system in slow mode to the
SMS menus. See “Performing a Slow
Boot” on page 131.
b. Examine the service processor error
logs. Look for a 4xxx yyyy error that
occurred during the slow boot that calls
out FRU(s) in the system unit.
c. If a 4xxx yyyy error occurred during the
slow boot, replace the FRU(s) indicated
by the location code(s).
d. If a 4xxx yyyy error did not occur during
the slow boot, replace:
v the service processor
Location: U0.1-P1-X1.
v
the system planar
Location: U0.1-P1.
B1xx 4603 Service processor firmware corrupted
1. Reload system firmware
2. Service processor
Location: U0.1-P1-X1
B1xx 4606 Firmware failure
1. Check for system firmware updates
2. Operator panel
Location: U0.1-L1
3. Service processor
Location: U0.1-P1-X1
B1xx 4608 Service processor early termination
1. Reset the system by disconnecting and
reconnecting system power
2. Reload system firmware
3. Service processor
Location: U0.1-P1-X1
B1xx 460A TOD clock has been reset
1. Set TOD clock
2. Service processor
Location: U0.1-P1-X1
B1xx 460B TOD battery failure TOD battery
Location: U0.1-P1-X1-V4
174
IntelliStation POWER 9114 Model 275 Service Guide