IBM 8671 - Eserver xSeries 235, Maintenance And Troubleshooting Manual

Page: 62 / 222

Table 6 describes the function of each switch on the switch block.
Table 6. Switches 1-8
Switch
number Default value
Switch
description
8 Off 400 MHz system board - Reserved.
533 MHz system board - Disable Wake on LAN after ac power-on.
7 Off Power-on override. When toggled to On, this switch forces the server to turn on,
overriding the power-on button.
6 Off Power-on password override. Changing the position of this switch bypasses the
power-on password check the next time the server is turned on and starts the
Configuration/Setup Utility program so that you can change or delete the power-on
password. You do not need to move the switch back to the default position after the
password is overridden.
Changing the position of this switch does not affect the administrator password check
if an administrator password is set.
See “Choices available from the Configuration/Setup main menu” on page 16 for
additional information about the power-on password.
5 Off Reserved.
4 Off Reserved.
3 Off Reserved.
2 Off Reserved.
1 Off Reserved.
CAUTION:
Before changing any switch settings or moving any jumpers, turn off the
server; then, disconnect all power cords and external cables. (Review the
information in “Installation guidelines” on page 45, “Handling static-sensitive
devices” on page 46, and “Safety information” on page 169.)
Note: Any system-board switch or jumper blocks that are not shown in the
illustrations in this book are reserved.
52
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide