IBM 8671 - Eserver xSeries 235, Maintenance And Troubleshooting Manual

Page: 84 / 222

Installing internal drives
If you add different types of drives, your system can read multiple types of media
and store more data. Several types of drives are available, such as:
v
Diskette
v
Hard disk
v
CD-ROM
v
DVD-ROM
v
Tape, including digital linear tape (DLT), super digital linear tape (SDLT), and
linear tape-open (LTO)
Note: The server supports both internal and external tape drives.
Your server contains hardware that enables you to replace a failed hard disk drive
without turning off the server. Therefore, you have the advantage of continuing to
operate your system while a hard disk drive is removed or installed. These drives
are known as hot-swap drives.
Each hot-swap drive has two indicator LEDs (see “Server controls and indicators”
on page 4). If the amber hard disk status LED for a drive is lit continuously, that
individual drive is faulty and requires replacement. When the hard disk drive status
LED indicates a drive fault, you can replace a hot-swap drive without turning off the
server.
Each hot-swap drive that you plan to install must be mounted in a hot-swap-drive
tray. The drive must have a Single Connector Attachment (SCA) connector.
Hot-swap-drive trays come with hot-swap drives.
74
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide