IBM 8671 - Eserver xSeries 235, Maintenance And Troubleshooting Manual

Page: 120 / 222

Parallel port connector
The following illustration shows the 25-pin, female D-shell parallel-port connector on
the rear of your server. This connector conforms to the industry standard.
13
1
25 14
Video port
Your server comes with an integrated super video graphics array (SVGA) video
controller. This controller is not removable, but you can disable it through the
Configuration/Setup Utility program or by installing a PCI video adapter.
Note: If you install a PCI video adapter, the server BIOS will automatically disable
the integrated video controller.
The following illustration shows the 15-pin analog video connector on the rear of
your server. This connector conforms to the industry standard.
1 5
11 15
Keyboard port
There is one keyboard connector on the rear of your server.
Note: If you attach a standard (non-USB) keyboard to the keyboard connector, the
USB ports and devices will be disabled during the power-on self-test
(POST).
The following illustration shows the keyboard connector on the rear of your server.
This connector conforms to the industry standard for a PS/2
®
keyboard.
6
4
2 1
3
5
Auxiliary-device (pointing device) port
The system board has one auxiliary-device port that supports a mouse or other
pointing device.
The following illustration shows the auxiliary-device connector on the rear of your
server. This connector conforms to the industry standard for a PS/2 pointing device.
6
4
2 1
3
5
Ultra320 SCSI system-board connectors
Your server has an integrated dual-channel Ultra320 small computer system
interface (SCSI) controller. This controller supports two independent, internal
Ultra320 SCSI channels. The SCSI channel connectors are on the system board.
Each channel supports up to 15 SCSI devices. This controller uses:
v
Double-transition clocking to achieve up to 320 MB-per-second data-transfer
rates
110
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide