IBM 8671 - Eserver xSeries 235, Maintenance And Troubleshooting Manual

Page: 91 / 222

DIMM 5 (J14)
DIMM 6 (J15)
DIMM 4 (J12)
DIMM 3 (J11)
DIMM 2 (J9)
DIMM 1 (J7)
Before you begin, read the documentation that comes with your option.
Complete the following steps to install a DIMM:
1. Review the information in “Installation guidelines” on page 45, “Handling
static-sensitive devices” on page 46, and “Safety information” on page 169.
2. Turn off the server and disconnect all power cords and external cables (“Turning
off the server” on page 9); then, remove the server cover (see “Removing the
server left-side cover and bezel (tower model)” on page 55 or “Removing the
server top cover and bezel (rack configuration)” on page 57).
3. Open the cover on the air-baffle assembly.
Air-baffle assembly
cover
Note: It is not necessary to remove the air-baffle assembly to perform this step.
Chapter 4. Customer replaceable units
81