IBM 3745 Series, Installation And Maintenance Manual

Page: 28 / 270

Installation Scenarios
Depending on the machine and the MES received, determine which installation
scenario you are going to perform (from Scenario 1 to Scenario 16). Refer to
Table 1-1 on page 1-5 and Table 1-1 on page 1-5 to see how the installation
tasks can be distributed between 2 CEs and define which document must be
used to start the installation and have an overview of the installation sequence.
Note: Refer to Table 1-2 on page 1-5 for more details about each scenario. If
you are installing a 3745 Model 17A, the statements concerning the installation of
an expansion frame and the procedures "CDF verify" and "locate bypass cards
positions" are not applicable.
NOTE
You are able to install the 3746-900 first, then connect the service processor
and run all diagnostics. Afterward the 3745 can be modified to model A (if
necessary) and connected to the 3746-900
1-4
3745-XXA 1-4 3746-9X0: 6563 SPIM