IBM 3745 Series, Installation And Maintenance Manual

Page: 65 / 270

18. ____ Then click on Next>>, then go to step 19 on page 1-43 (if you selected in
step 10 on page 1-36 to customize a 3270 session)
When defining an SDLC link to NetView thru an APPN network, CCM
parameters must be set as follows:
a. DLC Parameters 1/3:
¹
Transmit Receive Capability: Full Duplex
¹
Interface: V25 B
¹
Prot Type: Switched
¹
Clocking: External
¹
Link Station Role: Negotiable
b. DLC Parameters 2/3:
¹
Transmit NRZI: Yes
¹
Echo Defeat: NO
¹
Monitor Ring: Yes
¹
Answer Tone: Yes l
¹
Interface Gap: No
c. DLC Parameters 3/3: keep the default values
d. APPN Station:
¹
Pu Type: 2.1
¹
Destination Address: 1C
¹
For DLC and APPN parameters: keep the default values
When defining a link to NetView thru an SNA network, for examples of the
NCP generation, refer to:
¹
Figure 1-38 on page 1-42 for a LAN link, the LAN destination address
must be equal to the
.LOCADD/
(recorded in NCP gen).
¹
Figure 1-37 on page 1-42 for an SDLC link, the SDLC link is defined for
the alternate stream path to NetView.
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*
*
* MAJNODE FOR CONNECTION : MOSS-E <==> NETVIEW V2R3 *
* *
* *
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
NTVMOSSE VBUILD TYPE=SWNET,MAXGRP=1,MAXNO=1
*---------------------------------------------------------------------*
MOSSE
PU ADDR=04,PUTYPE=2,
.NETID=SYSTST/
,
.CPNAME=MOSSNMVT/
X
MAXPATH=8,MAXDATA=265,MAXOUT=1, X
DISCNT=NO,
Figure 1-36. Example of Switched Major Node Definition
Chapter 1. Installing and Setting Up Your Service Processor
1-41