IBM 3745 Series, Installation And Maintenance Manual

Page: 225 / 270

3. Slide cover forward to engage the front cover slots onto the chassis.
4. Install the three thumb screws.
Front Panel
To remove the front panel:
1. Remove the top cover.
2. Release the three top latches while gently pulling the top of the panel outward.
3. Keeping the panel at the same angle, gently pull the panel out from the bottom
of the chassis.
To install the front panel:
1. At the same angle that the panel was when removed, install the bottom tabs of
the panel in the chassis. Push up on the left and right bottom tabs, if
necessary, to get the tabs in the holes of the chassis.
2. Push the top of the panel toward the chassis until the three top latches lock in
place.
Front Bezel
To remove the front blank bezel:
1. Remove the top cover.
2. Remove the front panel.
3. Unlatch the tabs of the bezel and remove it from the panel.
Appendix H. Service Processor Aids
H-3