IBM 3745 Series, Installation And Maintenance Manual

Page: 87 / 270

001 (continued)
¹
Power-on the system.
Note: If you get a POST error code, press the pause key (while the error code is
on the screen). Write down any error codes that are displayed, then press F1 to
continue.
DID YOU RECEIVE A POST ERROR CODE?
Yes No
002
Go to Step 006 on page 3-14
003
Check your FIRST POST ERROR with the following list.
Symptom / Error FRU / Action
000
SCSI Adapter not enabled. 1 Verify adapter device and Bus Master
fields are enabled in PCI configuration
program. See documentation shipped
with computer.
02X 1. SCSI Adapter
08X
Check SCSI terminator installation. 1. SCSI Cable
2. SCSI Terminator
3. SCSI Device
4.SCSI Adapter
101
System board Interrupt failure. 1. System Board
102
System board timer error. 1. System Board
106 1. System Board
110
System board memory parity error. 1. Memory Module
2. System Board
111
I/O channel parity error. 1. Reseat adapters
2. Any Adapter
3. System Board
114
Adapter ROM error. 1. Adapter Module
2. System Board
129
Internal cache test error. 1.Processor
2. L2 Cache Memory
3. System Board
151
Real-time clock failure. 1. System Board
161
Bad CMOS battery. 1. Run Configuration/Setup Utility
2. CMOS Backup Battery (See
Appendix A, “Safety Information” on
page A-1)
3. System Board
Chapter 3. Service Processor Troubleshooting
3-3