IBM 3745 Series, Installation And Maintenance Manual

Page: 39 / 270

Figure 1-9. Installing the Keyboard
16. ____ Obtain a table or a desk large enough to receive the display, the
keyboard, and the modem, and go to Step 18.
17. ____ Obtain a table or a desk large enough to receive the service processor,
the display, the keyboard, and the modem, and go to Step 18.
18. ____ Connect the cables to the 6563 as follows (see Figure 1-10 on
page 1-16):
a. ____ Connect the keyboard cable
.A/
to the connector at the rear of the
service processor.
b. ____ Connect the mouse cable
.B/
to the connector at the rear of the
service processor.
Note: If you are installing the keyboard and the mouse outside of the
controller expansion, use the keyboard extender cable PN 10K8632
.G/
and the mouse extender cable PN 10K8633
.H/
(see Figure 1-11 on
page 1-16).
c. ____ Connect the service processor power cord
.C/
.
d. ____ Connect the token ring cable
.D/
(PN 6339098) to the service
processor connector.
e. ____ Connect the display signal cable
.F/
to the service processor
connector.
Note: If you are installing the display outside of the controller expansion,
use the extender cable PN 59G1270 (see Figure 1-11 on page 1-16,
reference
.J/
).
f. ____ After you secure all these connections, plug the power cords into
properly grounded electrical outlets.
Chapter 1. Installing and Setting Up Your Service Processor
1-15