IBM 3745 Series, Installation And Maintenance Manual

Page: 146 / 270

Diagnostic Error Code FRU/Action
175-0XX-XXX
Thermal Sensor(s) failure 1. Flash system
2. System board
175-195-XXX
Thermal Sensor(s) Test aborted by user 1. Information
2. Re-start the test, if need to
175-196-XXX
Thermal Sensor(s) test halt, error
threshold exceeded 1. Depress F3 to review the log file.
See
“Viewing the Test Log” on
page 4-8.
2. Re-start the test to reset the log file.
175-197-XXX
Thermal Sensor(s) test warning 1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test
175-198-XXX
Thermal Sensor(s) test aborted 1. If a component is called out, make
sure it is enabled and/or connected
2. Flash the system and re-test
3. Go to “Undetermined Problems” on
page 3-23
175-199-XXX
Thermal Sensor(s) test failed, cause
unknown 1. Go to “Undetermined Problems” on
page 3-23.
2. Flash the system and re-test
3. Replace component under function
test.
175-250-XXX
175-251-XXX
Thermal Sensor(s) limit error 1. Check fans
2. Check Power supply
3. Microprocessor
4. System board
185-000-XXX
Asset Security Test Passed 1. No action
185-XXX-XXX
Asset Security failure 1. Assure Asset Security Enabled
2. Flash system
3. System board
185-278-XXX
Asset Security Chassis Intrusion 1. C2 Cover Switch
2. System board
201-000-XXX
System Memory Test Passed 1. No action
201-XXX-XXX
System Memory error 1. Replace the memory module called
out by the test
2. System board
202-000-XXX
System Cache Test Passed 1. No action
202-XXX-XXX
System Cache error 1. Cache, if removable
2. System board
3. Microprocessor
206-000-XXX
Diskette Drive Test Passed 1. No action
4-24
3745-XXA 4-24 3746-9X0: 6563 SPIM