IBM 3745 Series, Installation And Maintenance Manual

Page: 64 / 270

17. Refer to Figure 1-35, then enter the following information:
a. ____ Generate (or not) the alerts to NetView (refer to the parameter
worksheet “Generate MOSS-E Alerts” on page C-4 ).
b. ____ Specify the NetView link through a SNA or APPN network.
c. ____ Select the number of links (1 or 2)
d. ____ If one link, the type (LAN or SDLC).
e. ____ Enter the machine type, model, and serial number
f. ____ Enter the Network ID, and local node name
Note: The Network ID and the Local node name parameters must match
the values recorded in the Switched Major node definition:
Network ID <===>
.NETID/
Local node name <===>
.CPNAME/
<===> Local PU Name
(Refer to Figure 1-36 on page 1-41 to see one example of switched major
node definition)
g. ____ If you are defining a 3270 session, enter the locally administrated
address (LAA).
Note: The LAN destination address is the TIC2 (3745) or TIC3
(3746-900) address through which you will access NetView. The TIC3
address can also be used for a DCAF link (SNA-attached console only).
h. ____ Enter the TIC3 RSAP value.
i. ____ If one SDLC link or two links (the alternate path is necessarily SDLC),
specify the SDLC link telephone number.
Figure 1-35. NetView Link/Reporting Customization
1-40
3745-XXA 1-40 3746-9X0: 6563 SPIM