IBM 3745 Series, Installation And Maintenance Manual

Page: 142 / 270

Diagnostic Error Code FRU/Action
030-199-XXX
SCSI interface test failed, cause unknown 1. Go to “Undetermined Problems” on
page 3-23.
2. Flash the system and re-test
3. Replace component under function
test.
035-000-XXX
RAID interface Test Passed 1. No action
035-0XX-XXX
RAID interface Failure 1. RAID signal cable
2. RAID device
3. RAID adapter card, if installed
4. System board
035-195-XXX
RAID interface Test aborted by user 1. Information
2. Re-start the test, if need to
035-196-XXX
RAID interface test halt, error threshold
exceeded 1. Depress F3 to review the log file.
See
“Viewing the Test Log” on
page 4-8.
2. Re-start the test to reset the log file.
035-197-XXX
RAID interface test warning 1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test
035-198-XXX
RAID interface test aborted 1. If a component is called out, make
sure it is enabled and/or connected
2. Flash the system and re-test
3. Go to “Undetermined Problems” on
page 3-23
035-199-XXX
RAID interface test failed, cause unknown 1. Go to “Undetermined Problems” on
page 3-23.
2. Flash the system and re-test
3. Replace component under function
test.
071-000-XXX
Audio port Interface Test Passed 1. No action
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error 1. Run Setup
2. Flash the system
3. System board
071-03X-XXX
Audio port failure 1. Speakers
2. Microphone
3. Audio card, if installed
4. System board
071-04X-XXX
Audio port failure 1. Run Setup
2. Audio card, if installed
3. System board
071-195-XXX
Audio port Test aborted by user 1. Information
2. Re-start the test, if need to
4-20
3745-XXA 4-20 3746-9X0: 6563 SPIM