IBM 3745 Series, Installation And Maintenance Manual

Page: 33 / 270

Service Processor Installation Tasks
Note: If you are not familiar with the Service Processor operations, refer to Service Processor and
Network Node Processor Service User, SY33-2127, then return here.
TASK DESCRIPTION GO TO
1 Installation Preparation “Step 1 - Preparing Your Installation”..
2 Install the System Unit, Display, and Keyboard “Step 2 - Installingf the System Unit, Display,
and keyboard” on page 1-10..
3 Install the 8228 and connect to the Service
Processor “Step 3 - Installing the Service Processor
Access Unit (8228)” on page 1-19..
4 Install and connect the RSF modem to the Service
Processor “Installing and Connecting the RSF Modem to
the Service Processor” on page 1-22 ..
5 Customize your service processor according to the
customer's options “Step 5 - Customizing Your Service Processor”
on page 1-34..
Step 1 - Preparing Your Installation
Obtain from the customer the following Parameter worksheets:
1. "Parameter definitions for RSF"
2. "NetView path parameters"
3. "Service Processor integration"
4. "Service Processor parameters for DCAF"
5. "NCP dump transfer" (not applicable for 3746-950)
These parameter worksheets are part of the 3745 Communication Controller
Models A and 3746 Models 900 and 950: Planning Guide, GA33-0457 Appendix A
and must be filled in by the customer. A copy of these parameter worksheets is
given at the end of this manual see Appendix C, “Parameter Worksheets” on
page C-1.
Chapter 1. Installing and Setting Up Your Service Processor
1-9