![background image](http://html1.mh-extra.com/html/hyundai/n700e-055hf/n700e-055hf_instruction-manual_2196197051.webp)
N700E INSTRUCTION MANUAL
4-7
4.2.3
Basic Function Mode
Func-
code
Name
Run-
time
Edit
Description
Defaults
F01
Outputfrequency setting
O
Standard default target frequency that
determines constant motor that deter-mines
constant motor speed. setting range
is 0.00 to 400.0Hz.(In the case of sensorless
vector control, setting range is 0.00 to 300.0Hz.)
(1) frequency setting from UP/DOWN key of
digital operator.
(2) Multi-step speed
By combining frequency reference
and intelligent input terminal ON/
OFF, up to 16 step of speed can be set.
(3) Remote operator (NOP), control
terminal input (O-L, OI-L).
Frequency reference by the local
potentiometer can be monitored..
0.00Hz
F02
Acceleration time1 setting
O
0.1 ~ 3000sec
0.1 ~ 999.9 --- by 0.1sec
1000 ~ 3000 --- by 1sec
Minimum
setting range
30.0sec
F03
Deceleration time 1 setting
O
0.1~3000sec
0.1 ~ 999.9 --- by 0.1sec
1000 ~ 3000 --- by 1sec
Minimum
setting range
30.0sec
F04
Rotation direction setting
X
Two options: select codes:
0... Forward run
1... Reverse run
0
A--
Extended function of
A groupsetting
-
Basic setting functions
setting range : A01
∼
A85.
-
b--
Extended function of
b groupsetting
-
Fine tuning functions
Setting range :b01
∼
b33
-
C--
Extended function of
C groupsetting
-
Terminal setting functions
Setting range :C01
∼
C27
-
H--
Extended function of
H groupsetting
-
Sensorless vector setting functions
Setting range :H01
∼
H15.
-
Note) If you set the carrier frequency less than 2kHz, acceleration / decelerationtime delays approximately
500msec.