![background image](http://html1.mh-extra.com/html/hyundai/n700e-055hf/n700e-055hf_instruction-manual_2196197003.webp)
N700E INSTRUCTION MANUAL
II
SAFETY
FOR THE BEST RESULTS WITH N700E SERIES INVERTER, READ THIS MANUAL AND ALL OF THE
WARNING SIGN ATTACHED TO THE INVERTER CAREFULLY BEFORE INSTALLING AND OPERATING IT,
AND FOLLOW THE INSTRUCTION EXACTLY. KEEP THIS MANUAL HANDY FOR YOUR QUICK
REFERENCE.
DEFINITIONS AND SYMBOLS
A SAFETY INSTRUCTION (MESSAGE) IS GIVEN WITH A HAZARD ALERT SYMBOL AND A SIGNED
WORD,
WARNING
or
CAUTION
.
EACH SIGNAL WORD HAS THE FOLLOWING MEANING THROUGHOUT THIS MANUAL.
THIS SYMBOL MEANS HAZARDOUS HIGH VOLTAGE. IT USED TO CALL YOUR
ATTENTION TO ITEMS OR OPERATIONS THAT COULD BE DANGEROUS TO YOU OR
OTHER PERSONS OPERATING THIS EQUIPMENT.
READ THESE MESSAGES AND FOLLOW THESE INSTRUCTIONS CAREFULLY.
THIS IS THE “SAFETY ALERT SYMBOL”. THIS SYMBOL IS USED TO CALL YOUR
ATTENTION TO ITEMS OR OPERATIONS THAT COULD BE DANGEROUS TO YOU OR
OTHER PERSONS OPERATING THIS EQUIPMENT.
READ THESE MESSAGES AND FOLLOW THESE INSTRUCTIONS CAREFULLY.
WARNING
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH,
IF NOT AVOIDED, CAN RESULT IN SERIOUS INJURY OR DEATH.
CAUTION
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED,
CAN RESULT IN MINOR TO MODERATE INJURY, OR SERIOUS DAMAGE OF PRODUCT.
THE MATTERS DESCRIBED UNDER
CAUTION
MAY, IF NOT AVOIDED,
LEAD TO SERIOUS RESULTS DEPENDING ON THE SITUATION. IMPORTANT MATTERS
ARE DESCRIBED IN
CAUTION
(AS WELL AS WARNING), SO BE SURE TO OBSERVE THEM.
NOTE
NOTES INDICATE AN AREA OR SUBJECT OF SPECIAL MERIT,
EMPHASIZING EITHER THE PRODUCT`S CAPABILITIES OR COMMON
ERRORS IN OPERATION OR MAINTENANCE.
HAZARDOUS HIGH VOLTAGE
MOTOR CONTROL EQUIPMENT AND ELECTRONIC CONTROLLERS ARE CONNECTED
TO HAZARDOUS LINE VOLTAGE.
WHEN SERVICING DRIVES AND ELECTRONIC CONTROLLERS,
THERE MIGHT BE EXPOSED COMPONENTS WITHCASES OR PROTRUSIONS AT OR
ABOVE LINE POTENTIAL.
EXTREME CARE SHOULD BE TAKEN TO PRODUCT AGAINST SHOCK. STAND ON AN
INSULATING PAD AND MAKE IT A HABIT TO USE ONLY ONE HAND WHEN CHECKING
COMPONENTS.
ALWAYS WORK WITH ANOTHER PERSON IN CASE AN EMERGENCY OCCURS.
DISCONNECT POWER BEFORE CHECKING CONTROLLER OR PERFORMING
MAINTENANCE.
BE SURE EQUIPMENT IS PROPERLY GROUNDED. WEAR SAFETY GLASSES
WHENEVER WORKING ON AN ELECTRIC
CONTROLLER OR ROTATING ELECTRICAL EQUIPMENT.