![background image](http://html1.mh-extra.com/html/hyundai/n700e-055hf/n700e-055hf_instruction-manual_2196197066.webp)
N700E INSTRUCTION MANUAL
4-22
Func-
code
Name
Run-
time
Edit
Description
Defaults
b27 Input phase loss
X
A function that detects phase loss in the input AC source.
Detection is performed using the fluctuation in the main
circuit's DC voltage. Also,in the case of degradation in the
main capacitor, this message could be occurred.
To set the detection time of input phase loss, “code b27” is
used. (0 ~ 30 in sec) When b27 equals “0”, input phase loss
function is disabled.
10
Other Function
b28
Communication time out
setting
O
This function detects communication time out in case of
communication cut off.
To set the detection time of time out, “code b28” is used.
0: No detect time out
0~60 : Detect time out when communication cut off
[ Unit : second ]
0
b29
Communication time out
operation mode
O
Set the communication time out operation mode
0 : Always active
1 : Active in case of inverter is running
0
b30 Display code setting
O
Set Initial display code d01 ~d13 after power on.
“code b30” is used.(1 ~ 13)
1
b31
2
nd
Communication
Channel (option) baud
rate setting
X
Setting 2
nd
485 communication channel baud rate
1:2400bps
2:4800bps
3:9600bps
4:19200bps
3
BRD(Dynamic braking) Function
b32 BRD selection
X
Three options: select codes:
0 : Invalid : BRD doesn’t operate
1 : During run : valid (BRD operates.)
During stop : invalid (BRD doesn’t operate.)
2 : During run, stop, valid (BRD operates.)
1
b33 BRD using ratio
X
Sets the BRD using ratio, range is 0.0 to 50.0% in units
of 0.1%.
When inverter exceeds the usage ratio, a trip occurs.
10.0%