![background image](http://html1.mh-extra.com/html/hyundai/n700e-055hf/n700e-055hf_instruction-manual_2196197091.webp)
N700E INSTRUCTION MANUAL
5-17
Analog Input Current / Voltage Select [AT]
•The [AT] terminal selects whether the inverter uses the voltage [O] or current[OI] input terminals for
external frequency control.
When the switch between the terminals [AT] and [CM1] is on, it is possible to set the output frequency by
applying a current input signal at [OI]-[L].
When the terminal is turned off, the voltage input signal at [O]-[L] is available.
Note that you must also set parameter A 01 = 1 to enable the analog terminal set for controlling
the inverter frequency.
Option
Code
Terminal
Symbol
Function Name
Input
State
Description
13
AT
Analog Input
Voltage/current
select
ON
Terminal OI is enabled for current input.
(uses terminal L for power supply return)
OFF
Terminal O is enabled for voltage input.
(uses terminal L for power supply return)
Valid for inputs:
C01,C02,C03,C04,C05,C06
Example:
Required setting
A01=01
Notes:
•If the [AT] option is not assigned to any
intelligent input terminal, then inverter uses the
algebraic sum of both the voltage and current
inputs for the frequency command(and A01=01)
•When using either the analog current and
voltage input terminal, make sure that the
[AT] function is allocated to an intelligent
input terminal.
•Be sure to set the frequency source setting
A01=01 to select the analog input terminals.