![background image](http://html1.mh-extra.com/html/hyundai/n700e-055hf/n700e-055hf_instruction-manual_2196197084.webp)
N700E INSTRUCTION MANUAL
5-10
[JG]
Terminal
RUN
[FW,RV]
Moter
Speed
(A27)
Jogging Command [JG]
•When the terminal [JG] is turned on and
the Run command is issued, the inverter
outputs the programmed jog frequency
to the motor. Use a switch between
terminals [CM1] and [P24] to activate
the JG frequency.
•The frequency for the jogging operation is
set by parameter A26.
•Set the value 1(terminal mode) in A02(Run command)
•Since jogging does not use an acceleration ramp, we recommend
setting the jogging frequency in A26 to 5Hz or less to prevent tripping.
The type of deceleration used to end a motor jog is selectable by programming function A27 The options are:
0 : Free-run stop (coasting)
1 : Deceleration (normal level) and stop
2 : DC injection braking and stop
Option
Code
Terminal
Symbol
Function Name
Input
State
Description
6
JG
Jogging
ON
Inverter is in Run Mode, output to
motor runs at jog parameter
frequency.
OFF
Inverter is in Stop Mode.
Valid for inputs:
C01,C02,C03,C04,C05,C06
Example:
Required setting
A02, A26, A27
Notes:
•No jogging operation is performed when
the set value of jogging frequency A26 is
smaller than the start frequency B10 or the
value is 0Hz.
•Be sure to stop the motor when switching
the function [JG] on or off.