manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 88 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 88

2-10

To prevent damage to the seats:
• Always stop adjusting the seats

when the seat has been adjust-
ed as far forward or rearward as
possible.

• Do not adjust the seats longer

than necessary when the vehicle
is turned off. This may result in
unnecessary battery drain.

• Do not operate two or more

seats at the same time. This may
result in an electrical malfunc-
tion.

Forward and rearward adjustment

To move the seat forward or rearward:
1. Push the control switch forward  or

rearward.

2. Release the switch once the seat

reaches the desired position.

Seatback angle 

To adjust the seatback:
1. Rotate the top of control switch

forward or rearward.

2. Release the switch once the seat-

back reaches the desired position.

NOTICE

Safety system of your vehicle

OOS037006

OOS037005

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments