manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 309 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 309

5-8

Driving your vehicle

Button Position

Action

Notice

ON 

Press the POWER button while it is in the
ACC position without depressing the brake
pedal.
The warning lights can be checked before
the vehicle is started.

Do not leave the POWER button in the ON
position when the vehicle is not in the ready
(

) mode to prevent the battery from dis-

charging.

START

To start the vehicle, depress the brake pedal
and press the POWER button with the gear
in the P (Park) position.

If you press the POWER button without
depressing the brake pedal, the vehicle does
not start and the POWER button changes as
follows:

OFF 

→

→

ACC 

→

→

ON 

→

→

OFF or ACC

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments