manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 38 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 38

H29

4. Remove the charging port dust

cover (1).

5. Inspect the charging port to make

sure it is free from any dust or
debris.

6. Hold the charging connector han-

dle firmly and insert the connector
into the charging port all the way.

If the connector is not completely
inserted into the charging port, arc-
ing may occur. This may cause a
fire.

7. Check to see that the charging

indicator light in the instrument
cluster is illuminated. Charging
has not been initiated if the charg-
ing indicator light is OFF.
If the charging indicator light is
OFF, it may be necessary to dis-
connect the charging connector
from the vehicle and repeat the
connection process. Refer to the
charging station display screen for
more information.
During cold weather, DC charging
may not be available to prevent
high voltage battery degradation.

In high ambient temperature con-
ditions like during summer
months, the A/C system may be
operating during EV battery
charging. You may hear additional
noises generated from the opera-
tion of the A/C compressor and
cooling fan. This is a normal con-
dition.

Information 

Note that the vehicle cannot be shifted
out of P (Park) when the vehicle is
charging.

i

NOTICE

OOSEVQ018016N

OOSEVQ018010

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments