manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 324 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 324

5-23

Dri
ving y

o

ur v

ehicle

5

Cancelling the Smart
Regeneration System:

• Cancelled manually

Pulling and holding the right side
paddle shifter for more than 1 sec-
ond.
The Smart Regeneration System
turns off temporarily. Note that the
"AUTO" indicator in the LCD dis-
play turns off.

• Cancelled automatically

- 

The vehicle is shifted to N

(Neutral), R (Reverse) or P
(Park).

- 

The Cruise Control System

(including the Smart Cruise
Control system) is enabled.

- The ESC (Electronic Stability

Control) or ABS is activated.

Resuming the Smart
Regeneration System

To re-activate the Smart
Regeneration System while driving,
pull and hold the right side paddle
shifter for more than 1 second again.
Note that the "AUTO" indicator in the
LCD display turns back on, signaling
that the Smart Regeneration System
is enabled again.

Disabling the Smart
Regeneration System

To turn off the system, shift to P
(Park) and deselect 'User Settings 

→

Convenience 

→

Smart Regeneration'

on the User Settings mode.

Vehicle-to-Vehicle Front
Recognition - Front Radar
Sensor

In order for the Smart Regeneration
System to operate properly, always
make sure the radar sensor cover is
clean and free of dirt, snow, and
debris. Dirt, snow, or foreign sub-
stances on the lens may adversely
affect the sensing performance of
the sensor. In this case, the system
operation may stop temporarily and
not operate normally.

•

Do not apply license plate
frame or foreign objects such
as a bumper sticker or a
bumper guard near the radar
sensor. Doing so may adverse-
ly affect the sensing perform-
ance of the radar.

•

Always keep the radar sensor
and lens cover clean and free
of dirt and debris.

CAUTION

When the Smart Regeneration
System is cancelled automati-
cally, adjust the vehicle speed
directly by depressing the
accelerator or brake pedal
according to the road condition
ahead and driving condition.

WARNING  

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments