manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 335 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 335

5-34

Driving your vehicle

AUTO HOLD turning Off!
Press brake pedal

When the conversion from Auto Hold
to EPB is not working properly a
warning will sound and a message
will appear.

Parking brake automatically
engaged

If the EPB is applied while Auto Hold
is activated, a warning will sound and
a message will appear.

EPB malfunction indicator 

This warning light illuminates if the
POWER button is changed to the ON
position and goes off in approximate-
ly 3 seconds if the system is operat-
ing normally.
If the EPB malfunction indicator
remains on, comes on while driving,
or does not come on when the
POWER button is changed to the ON
position, this indicates that the EPB
may have malfunctioned.
If this occurs, have the system
checked by an authorized HYUNDAI
dealer.

OIK057077N

OOSEV058017

OIK057079N

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments