manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 349 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 349

5-48

Driving your vehicle

Drive Mode

The drive mode may be selected
according to the driver's preference
or road condition.
• The mode changes, as below,

whenever the DRIVE MODE but-
ton is pressed.

• Press and hold the DRIVE MODE

button to select ECO+ mode. (if
equipped)

D

DR

RIIV

VE

E  M

MO

OD

DE

E  S

SY

YS

ST

TE

EM

M  

OOSEV058022

NORMAL

SPORT

ECO

Initial Setting for Each Drive Mode

Drive mode

NORMAL

SPORT

ECO

ECO+ *

1

(if equipped)

Feature

Normal driving

mode

Sporty driving

mode

Optimal for 

eco- driving

Ultra power 

saving driving

mode

Button activation

Press

Press

Press

Press and hold

Indicator on the

cluster

-

Air conditioner/

heater system 

control

NORMAL

(ECO/

NORMAL)

NORMAL

(ECO/

NORMAL)

ECO

Off

Speed limit

- 

(90~120 km/h) *

2

-

-

Below 90 km/h

Regenerative 

braking level

1 (1~3) *

2

1 (1~3) *

2

2 (1~3) *

2

2

*

1

: Change to ECO+ mode (if equipped)
- Distance to empty may not change when the air conditioner/heater system is off. However,

actual distance may be extended.

- Air conditioner/heater system turns off (except the defroster) but you may turn it on if nec-

essary.

- When the drive mode is switched from the ECO+ mode to a different mode, it is changed to

air conditioner/heater operation status of the ECO mode.

- The speed limit is automatically deactivated when the Smart Cruise Control system is in acti-

vation or the accelerator pedal is depressed to the end. If speed limit function is deactivated
by depressing the accelerator pedal, the speed limit function will reactivate when vehicle
speed is lower than the set speed limit. Also, the speed is changed to the speed set at ECO
mode when the drive mode switches from the ECO+ mode to ECO mode.

*

2

: It is possible to set the driving condition for each drive mode (except the ECO+ mode) at the

drive mode setting in the Audio and AVN system. For more information, refer to the sepa-
rately supplied manual.

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments