manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 63 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 63

H54

D

DR

RIIV

VIIN

NG

G  A

AN

ND

D  O

OP

PE

ER

RA

AT

TIIN

NG

G  IIN

NF

FO

OR

RM

MA

AT

TIIO

ON

N  ((C

CO

ON

NT

T..))

EV Battery Overheated! 
Stop vehicle

This warning message is displayed
to protect battery and electric vehicle
system when the high voltage bat-
tery temperature is too high.
Turn off the POWER button and stop
the vehicle so that the battery tem-
perature decreases.

Power limited

In the following cases, this warning
message is displayed when the vehi-
cle's power is limited for safety.
• When the high voltage battery is

below a certain level, or voltage is
decreasing.

• When the temperature of the motor

or high voltage battery is very high.

• When there is a problem with the

cooling system or a failure that
may interrupt normal driving.

• When this warning message is

displayed, do not accelerate or
start the vehicle suddenly.

• When the high voltage battery

level is low, the power down
warning illuminates and the
power output from the vehicle is
limited.

Charge the battery

immediately since your vehicle
may not drive uphill or skid on a
slope with the warning light ON.

NOTICE

OOSEV048122N

OOSEV048125L

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments