manualshive.com logo in svg

Hyundai KONA Electric 2020, Owner'S Manual, Page: 102 / 541

Share
Download
Hyundai KONA Electric 2020 Owner'S Manual Download Page 102

2-24

Safety system of your vehicle

Seat Belt Warning Light

Driver's seat belt warning

As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you place the POWER button to the
ON position regardless of belt fas-
tening. At this time, if the seat belt is
not fastened a warning chime will
sound for 6 seconds.

If you do not fasten the seat belt and
you drive over 9 km/h 
(6 mph), the warning light will stay
illuminated.
If you do not fasten the seat belt and
you drive over 20 km/h 
(12 mph) the seat belt warning chime
will sound for approximately 100 sec-
onds and the corresponding warning
light will blink.

If you unfasten the seat belt while
driving under 20 km/h (12 mph), the
seat belt warning light will illuminate
until the seat belt is fastened.
If you unfasten the seat belt while
driving over 20 km/h (12 mph), the
seat belt warning chime will sound for
approximately 100 seconds and the
corresponding warning light will blink.

Damaged seat belts and seat
belt assemblies will not operate
properly. Always replace:

•

Frayed, contaminated, or dam-
aged webbing

•

Damaged hardware

•

The entire seat belt assembly
after it has been worn in an
accident, even if damage to
webbing or assembly is not
apparent

WARNING  

OOSEV038009K

Summary of Contents for KONA Electric 2020






























































































































































































































































































































































































































































































































































Reviews:

No comments